TAGS
| FUNCTIONS： | CHARACTERISTIC： | PARAMETERS： | |||
| 1. | Measurement of each cylinder's delivery at any speed. | 1. | Typical product. | Output power | 5.5 /7.5/11/15/18.5/22/30KW |
| 2.? | Checking of each cylinder's injection timing with static. | 2. | Inverter driver. | Electric supply | 3phase380V/50HZ（or on request) |
| 3. | Checking of the sealing of injection pump body. | 3. | Adjusting speed by two ways, hand and preset speed. 7-steps speed preset. | Interaxe height | 125mm |
| 4. | Checking of the advance device in dynamics. | 4. | High output torque, low fall of rotation speed. Adjusting speed quickly. | Volume of fuel tank | 60L |
| 5. | Checking of the pneumatic governor. | 5. | Speed, strokes, advance angle and oil temperature are displayed by digital instruments.?? | Cylinders | 12cyl. |
| 6. | Checking of the mechanical governor. | 6. | With protect function for over and low voltage and short phase.?? | Feeding fuel pressure | low：0-0.4MPA high：0-4MPA |
| 7. | Checking of the vacuum capacity of governor. | 7. | Save electric power. | Range of speed | （+/-）0-4000RPM |
| 8. | Measurement of the internal pressure of distributor pump body. | 8. | It can test both distributor ( VE ) and in-line pumps. | Control fuel temperature | 40+/-2 |
| 9. | Measurement of the reflux delivery of distributor pump. | DC. supply | 12/24V | ||
| 10. | Testing of the electro-magnetic valve of distributor pump. | Output air | -0.05-0.3MPA | ||
| 11. | Checking of the transfer pump. | ||||
| 12. | Checking of the LDA. | ||||
