TAGS
| FUNCTIONS: | CHARACTERISTIC: | PARAMETERS: | |||
| 1. | Map and check the curve of governor(idle , part and full load ). | 1. | Quick view the characteristic curve of governor in dynamics.Test pump with the curve of governor. Save time, save effort, rapid, audio-visual,accurate. It's a very good tool for specialist to test pump. | Power | 5.5 /7.5/11/15/18.5/22/30KW |
| 2.? | Checking of the advance device in dynamics. | 2. | Computer (industrial computer work station, hand book, pc) measure and control. Standard computer and standard ports. CD-ROM drive, hard disk, Windows operating system. | Electronical supply | 3phase,380V/50HZ (or on request) |
| 3. | Measurement of each cylinder's delivery at any speed. | 3. | High definition, LCD or CRT monitor. | Interaxe height | 125mm |
| 4. | Checking of each cylinder's injection timing with static. | 4. | Four ways to adjust speed. Hand, digital,programmed 8-steps preset,slide. | Volume of fuel tank | 60L |
| 5. | Measurement of rack travel at any speed. | 5. | You can set up test data of injection pump,and use it to control test bench. | DC.supply | 12/24V |
| 6. | Checking of the LDA. | 6. | You can set up database of governor's curve. | Feeding fuel pressure | low：0-0.4MPA high：0-4MPA |
| 7. | Checking of the mechanical governor. | 7. | You can compare the test curve with the standard curve of governor. | Range of speed | （+/-）0-4000RPM |
| 8. | Checking of the pneumatic governor. | 8. | You can get a report of a tested pump. | Control fuel temperature | 40+/-2 |
| 9. | Checking of the vacuum capacity of governor. | 9. | Patent technology. | Cylinders | 12cyl. |
| 10. | Measurement of the internal pressure of distributor pump body. | 10. | Two control system. Computer and instruments.You can select one of them. | Output air | -0.05-0.3MPA |
| 11. | Measurement of the reflux delivery of distributor pump. | 11. | With protect function for over and low voltage and short phase. | ||
| 12. | Testing of the electro-magnetic valve of distributor pump. | 12. | Save electric power. Direct drive AC motor. | ||
| 13. | Checking of the transfer pump. | 13. | High output torque,low fall of rotation speed.Adjusting speed quickly. | ||
| 14. | Checking of the sealing of injection pump body. | 14. | It can test both distributor ( VE )and in-line pumps. | ||
